Chain actuators - powerful automatic window openers
The PA-K-50/300 chain actuator is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The actuator can be mounted on any window profile or frame by using different mounting brackets. (Brackets are not included.) All PA-K-50 chain actuators are equipped with a back-rigid chain.
Parameterization with software interface SICO LINK
The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain actuators can be used with additional locking systems
The actuator signals a potential-free contact for additional locking in the end positions and can therefore be used with interlocking actuators in sequence controls. Due to the modern, EV1 anodized aluminium profile housing and the compact design, chain actuators are very well suited for use in demanding residential and commercial properties.
Power package with 500 N - Performance features chain actuator PA-K-50/300-S
The chain actuator PA-K-50/300-S is a synchronous operation actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward opening windows and flaps on the facade. The installation is possible at main closing edges. With a push and pull force of 500 N the chain actuator PA-K-50/300 precisely opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 300 mm. When needed, the stroke can be easily reduced via the SICO LINK software interface.
Chain actuators - powerful automatic window openers
The PA-K-50/600 chain actuator is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The actuator can be mounted on any window profile or frame by using different mounting brackets. (Brackets are not included.) All PA-K-50 chain actuators are equipped with a back-rigid chain.
Parameterization with software interface SICO LINK
The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain actuators can be used with additional locking systems
The actuator signals a potential-free contact for additional locking in the end positions and can therefore be used with interlocking actuators in sequence controls. Due to the modern, EV1 anodized aluminium profile housing and the compact design, chain actuators are very well suited for use in demanding residential and commercial properties.
Power package with 500 N - Performance features chain actuator PA-K-50/600-S
The chain actuator PA-K-50/600-S is a synchronous operation actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward opening windows and flaps on the facade. The installation is possible at main closing edges. With a push and pull force of 500 N the chain actuator PA-K-50/600 precisely opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 600 mm. When needed, the stroke can be easily reduced via the SICO LINK software interface.
Chain actuators - powerful automatic window openers
The PA-K-50/800 chain actuator is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The actuator can be mounted on any window profile or frame by using different mounting brackets. (Brackets are not included.) All PA-K-50 chain actuators are equipped with a back-rigid chain.
Parameterization with software interface SICO LINK
The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain actuators can be used with additional locking systems
The actuator signals a potential-free contact for additional locking in the end positions and can therefore be used with interlocking actuators in sequence controls. Due to the modern, EV1 anodized aluminium profile housing and the compact design, chain actuators are very well suited for use in demanding residential and commercial properties.
Power package with 500 N - Performance features chain actuator PA-K-50/800-S
The chain actuator PA-K-50/800-S is a synchronous operation actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward opening windows and flaps on the facade. The installation is possible at main closing edges. With a push and pull force of 500 N the chain actuator PA-K-50/800 precisely opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 800 mm. When needed, the stroke can be easily reduced via the SICO LINK software interface.
Chain actuators - powerful automatic window openers
The PA-K-50/1000 chain actuator is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The actuator can be mounted on any window profile or frame by using different mounting brackets. (Brackets are not included.) All PA-K-50 chain actuators are equipped with a back-rigid chain.
Parameterization with software interface SICO LINK
The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain actuators can be used with additional locking systems
The actuator signals a potential-free contact for additional locking in the end positions and can therefore be used with interlocking actuators in sequence controls. Due to the modern, EV1 anodized aluminium profile housing and the compact design, chain actuators are very well suited for use in demanding residential and commercial properties.
Power package with 500 N - Performance features chain actuator PA-K-50/1000-S
The chain actuator PA-K-50/1000-S is a single operation actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward opening windows and flaps on the facade. The installation is possible at main closing edges. With a push and pull force of 500 N the chain actuator PA-K-50/1000-S precisely opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. When needed, the stroke can be easily reduced via the SICO LINK software interface.
Chain actuators - powerful automatic window openers
The PA-K-50/1000 chain actuator is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The actuator can be mounted on any window profile or frame by using different mounting brackets. (Brackets are not included.) All PA-K-50 chain actuators are equipped with a back-rigid chain.
Parameterization with software interface SICO LINK
The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain actuators can be used with additional locking systems
The actuator signals a potential-free contact for additional locking in the end positions and can therefore be used with interlocking actuators in sequence controls. Due to the modern, EV1 anodized aluminium profile housing and the compact design, chain actuators are very well suited for use in demanding residential and commercial properties.
Power package with 500 N - Performance features chain actuator PA-K-50/1200-S
The chain actuator PA-K-50/1200-S is a synchronous operation actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward opening windows and flaps on the facade. The installation is possible at main closing edges. With a push and pull force of 500 N the chain actuator PA-K-50/1200-S precisely opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. When needed, the stroke can be easily reduced via the SICO LINK software interface.
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.
