Basic Damper System
UniDamp
The EV-DCP-B Basic Damper System is a cost effective and reliable solution for smaller damper installations utilising a hard-wired installation.
The system is available in 2 versions with a maximum of 15 and 30 dampers respectively. The system is compliant with BS EN12101-10 Smoke and Heat Control Systems, Power Supplies.
How the Basic Damper System works
The panel receives interfaces from the fire alarm system to operate dampers to meet the building cause and effect. All dampers are monitored and the status indicated on the front of the panel.
A key operated switch is included on the panel for test and override functions. Volt free signals are included for alarm, fault, override and test for remote monitoring.
Basic Damper System Control Panel
EV-DCP-B
Suitable for smaller installations, the DCP-B control panel is a low-cost solution for hard-wired nonaddressable systems that is fully compliant with BS EN 12101:10 Smoke and Heat Control Systems. The control panel is available in 2 sizes with 15 and 30 damper options monitoring open and closed positions.
Basic Damper Control System Resources
A library of UniDamp system documentation
We have developed a range of documents available to view and download directly from our website. These resources will help you understand and specify UniDamp in your projects.Case Studies
Explore our case studies to see how our Damper Control system has been implemented in a range of projects.