Wind and Rain Detector for Ventilation Systems

£435.00 / £522.00 incl. VAT

Wind / Rain detector, type WTS-892

Wind / Rain detector with built-in evaluation electronics and built-in time delay, for connection to SHEV and ventilation control systems, with heated sensor surface to prevent false triggering in case of dew, snow or ice, rated voltage 24 V DC / AC, current consumption in standby mode 70 mA (when triggered 110 mA), protection class IP 65, operating temperature - 20° C to +85° C, load capacity of the signal contact 30 V / 1 A, with potential-free change-over contact for an on-site evaluation, housing ABS, white, incl. mounting bracket in aluminum, as well as a pole clamp, galvanized, for 2" pipe.

Manufacturer:
SIMON PROtec Systems GmbH
Type: Rain detector, type WS-892
Article number: A3 4568

Frequently Bought Together

Wind and Rain Detector for Ventilation Systems + EV-301Smoke Ventilation AOV Control Pane Control Panel
Price for both: £816.00

The wind and rain detector combination WTS-892 was designed for connection to the SHE and ventilation control panels of Simon PROtec Systems GmbH. In the event of excessive wind and / or rain, the detectors prevent the windows from being controlled by the control panel being left open.
The wind force measured via the wind turbine is passed on to the integrated evaluation electronics. This measures the actual value and matches it with the set limit value. If the value is exceeded, a signal contact activates the "Close" command.

Heated sensor plate for more functional safety

The WTS-892 wind and rain detector is equipped with a heated sensor plate. This prevents false triggering in extreme weather conditions.
The limit value of the wind force can be freely selected (between 1 and 12 Beaufort). By default, the detector is at 4 Bft. set. Over a switch-on delay of up to 24 seconds, any wind gusts can be bridged. It is possible to mount the wind and rain detector both on a mast and directly on a wall.

Wind and rain detector combination WTS-892 at a glance:

  • Rain sensor with certified gold contacts for reliable reporting
  • after activation 15-minute constant CLOSE command to relieve the controller in case of rapid weather fluctuations
  • heated sensor plate
  • Potential-free changeover contact for on-site evaluation
  • including mounting bracket in natural aluminum and mast clamp
  • Wind sensor adjustable from a gentle breeze to a hurricane

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Article namewind rain detector WTS-892
IP codeIP65
Weight0.4 kg
Housing length190 mm
Housing width100 mm
Housing height150 mm
Environment temperature range-20 °C - 85 °C
HousingPlastic ABS
Colourlight grey
Features3 Years warranty SHEV VENT

Resize Font
Contrast Mode
1
    1
    Your Basket
    Daily Ventilation Switch Plate
    Daily Ventilation Switch Plate
    1 X £27.00 = £27.00