Rack idler EA-SZ-M-350 for rack actuator
Rack idler EA-SZ-M-350 at a glance:
- Rack worm, type EA-SZ-M
- with eyebolt d = 6 mm
- Upper and lower bracket included
- non-adjustable bracket storage point
- not suitable for LO actuators
Accessories rack-and-pinion actuator EA-SZ-M-550
Rack idler EA-SZ-M-550 at a glance:
- Rack worm type EA-SZ-M
- with eyebolt (d = 6 mm)
- including upper and lower bracket
- Bracket bearing point not adjustable
- not suitable for LO actuators!
Attention! Different brackets for SZ and SZ-M
Accessories rack-and-pinion actuator EA-SZ-M-750
Rack idler EA-SZ-M-750 at a glance:
- Rack worm type EA-SZ-M
- with eyebolt (d = 6 mm)
- including upper and lower bracket
- bracket bearing point not adjustable
- not suitable for -LO actuators!
Attention! Different consoles for SZ and SZ-M
Accessories rack-and-pinion actuator EA-SZ-M-1000
Rack idler EA-SZ-M-1000 at a glance:
- Rack idler EA-SZ-M-1000, type EA-SZ-M
- with eyebolt (d = 6 mm)
- including brackets (upper and lower bracket)
- Console bearing point not adjustable
- not suitable for LO actuators!
Attention! Different brackets for SZ and SZ-M
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. For more information see Group SCS’ Technical Bulletin. It is the responsibility of the installer to ensure installations meet the relevant standards and that the installer has the appropriate competence to install or replace smoke ventilation products. We recommend installers hold an up-to-date IFC SDI 19 Smoke Control Systems certification to demonstrate compliance.
