Slit actuator EA-L/S-A-500/200-02

£225.00 / £270.00 incl. VAT

Electromechanical slit actuator, type EA-L/S-A-500/200-02

Tested to DIN EN 12101-2. Voltage 24 V DC, rated current 1.2 A, nominal force 500 N, IP 20, switch-on duration 30%, running speed at nominal load 8.4 mm/s, integrated electronic overload cut-off and potential advance "F", as well as built-in position-independent stop damping, in continuous aluminum profile tube, housing anodized E6 / EV1, with cable entry on the motor housing cover, incl. 3.0 m silicone connection cable SIHF 3 x 0.75 mm², light gray, integrated housing for flexible bracket system in the motor housing. Overall length of motor housing: Stroke + 284 mm + 20 mm (cable insert), Stroke 185 mm. The article includes the rear bracket, type K-L-UK-J | K2 1563, deployment angle, type AW-80-4-S / K2 1513 and matching flange / N-LS-4.2-01-1.

The slit actuator EA-L/S-A-500/200-02 sets new standards in the field of electrical actuation of inward-opening and now outward-opening blades with its patented movement mechanism. Even with small stroke lengths, large opening widths can be achieved. In addition to the automatic cut-off under load, the integrated electronics also take over a torque control by monitoring current consumption to the force curve. The slit actuator offers a temperature stability of 30 minutes at 300 °C according to DIN EN 12101-2.

Ideal actuator with little space

With very small internal space requirements (total construction up to 120 mm), very large opening angles of up to 60° or more can be achieved with rotary, tilting and top hung wings in solo or, if required, in tandem or synchronous design.
After technical inspection, the slit actuator is also suitable for swing vanes and reversing blades. Also recommended is the combination with an electr. additional locking in order to lock the window in the closed position adequately.

Your benefits at a glance:

  • large opening widths
  • integrated overload cut-off
  • torque control
  • Temperature stability of 30 minutes at 300 °C
  • suitable for swinging and reversing blades
  • ideal even with little space

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Article nameSlit actuator EA-L/S-A-500/200-02
Input voltage24 V DC
Nominal current1.2 A
Stroke185 mm
Push force500 N
Pull force500 N
Running speed8.4 mm/s
IP codeIP20
Switch on duration30 %
Weight1.7 kg
Housing length516 mm
Housing width36 mm
Housing height42 mm
Connection cableSilicone cable 3 x 0.75 mm², light gray, length 3,000 mm
Nominal working temperature20 °C
Environment temperature range-5 °C - 75 °C
Nominal locking force600 N
HousingThrough aluminum profile tube, anodized E6 / EV1 with integrated mounting for flexible bracket system
Appliance classIII
Cut-Offintegrated overload cut-off
Features3 Years warrantySHEVVENTInput 24 VDCN-SHEV approved
Housing typeAluminium

Resize Font
Contrast Mode
    Your Basket
    Your basket is emptyReturn to Shop