Slit actuator EA-L/S-750/300-S

£325.00 / £390.00 incl. VAT

Electromechanical slit actuator, type EA-L/S-500/500-S

Tested to DIN EN 12101-2. Voltage 24 V DC, rated current 1.3 A, nominal force 500 N, IP 20, switch-on duration 30%, running speed at nominal load 8.4 mm / s, integrated electronic overload cut-off and potential advance "F", as well as built-in position-independent stop damping, in continuous aluminum Profile tube, housing anodized E6 / EV1, with cable entry on the motor housing cover, incl. 2.0 m silicone connection cable SIHF 3 x 0.75 mm², light gray, integrated housing for flexible bracket system in the motor housing. Overall length of motor housing: Stroke + 284 mm + 20 mm (cable insert), Stroke 485 mm, incl. Rear bearing, Type HK-L and setting angle, Type AW-80-S.

The slit actuator EA-L/S-500-S is a synchro slit actuator that has been specially modified for louvre windows. In conjunction with a TG-24 (RWA) glass louvre, the actuator is considered to be the optimum solution for the supply air system and in the SHE area. Even with small stroke lengths, large opening widths can be achieved. As a synchro version, the actuator achieves very large opening angles of 60° and more.

Adequate locking by additional locking

In addition to the torque control by monitoring current consumption to the force curve, the integrated electronics also takes over the automatic cut-off under load. After a technical test, the slit actuator can also be used for bottom hung wings and rotary wings. An additional electrical lock type ZVE-UNI-I / A locks the window adequately.

Your benefits at a glance:

  • Synchro actuator
  • unique opening kinematics via deployment angle
  • 60° opening within the soffit - also possible over 140° opening
  • for inward and outward opening bottom hung wings and rotary wings
  • integrated electronic overload cut-off
  • integrated safety shutdown
  • can be combined with additional electrical locking ZVE-UNI-I / A

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Article nameSlit actuator EA-L/S-500/500-S
Input voltage24 V DC
Nominal current1.3 A
Stroke485 mm
Push force500 N
Pull force500 N
IP codeIP20
Switch on duration30 %
Weight2.2 kg
Housing length816 mm
Housing width36 mm
Housing height42 mm
Connection cableSilicone cable 5 x 0.75 mm², light gray, length 3,500 mm
Nominal working temperature20 °C
Environment temperature range-5 °C - 75 °C
Nominal locking force600 N
HousingAluminum profile tube, anodized E6 / EV1 with integrated mounting for flexible bracket system
Appliance classIII
Cut-Offintegrated electronic overload cut-off
Features3 Years warrantySynchroSHEVVENTInput 24 VDCN-SHEV approved
Housing typeAluminium

Resize Font
Contrast Mode
0
    0
    Your Basket
    Your basket is emptyReturn to Shop