The M-SHEV® is an intelligent and adaptable control panel designed for single- and multi-zone smoke ventilation systems. Its modular architecture allows the panel to be configured for a variety of applications, including multiple zoned automatic opening vents and BRE Smoke Shaft systems serving buildings of up to 18 floors.
The central microprocessor connects directly to the Simon Link® user interface, enabling straightforward plug-and-play configuration on site. This allows the system’s control strategy and cause-and-effect programming to be tailored to the specific requirements of the installation.
Each base panel is supplied with a switch-mode power supply, battery pack and ZI-100 central interface module. The system is then expanded using DIN rail-mounted modules, including SI-100-SP sensor interface modules for zone inputs, smoke detectors and fire alarm signals, MR-120 motor relay modules for 24V DC actuator outputs, and optional MI-100 programmable relay and BI-100 Modbus interface modules.
Operating from a 230V AC supply, the M-SHEV® provides 24V DC smoke vent outputs and supports an optional BMS connection through the BI-100-MB BUS module. Signal contacts are rated at up to 1A at 30V DC, while a range of spring-clamp termination sizes is available to accommodate different installation requirements.
The panel is housed in a mild-steel enclosure with a RAL 7035 light-grey powder-coated finish and an IP55 protection rating. It is suitable for wall or floor mounting and is CE marked in accordance with the Low Voltage and EMC Directives. The system is designed with reference to BS EN 12101-10, prEN 12101-9 and BS ISO 21927-9.
Please note: As per our terms of sale this product is non-refundable.
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. For more information see Group SCS’ Technical Bulletin. It is the responsibility of the installer to ensure installations meet the relevant standards and that the installer has the appropriate competence to install or replace smoke ventilation products. We recommend installers hold an up-to-date IFC SDI 19 Smoke Control Systems certification to demonstrate compliance.
