Sale!

Linear actuator EA-L-750/1000-S

£270.00 / £324.00 incl. VAT

Linear actuator EA-L-750/1000-S
24 V DC / 1.4 A / 750 N / 1000 mm stroke / Synchronous actuator

The linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.

Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.4 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 750 N
Pulling force: 750 N
Nominal locking force: 900 N
Stroke length: 1000 mm
Running speed: 6.4 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 5 x 0.75 mm², light grey, length 3,000 mm
Dimensions (LxWxH): 1363 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 3.55 kg

Options:
- Coating according to RAL or DB

Manufacturer:
SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-750/1000-S
Article number: M2 1746 S

The EA-L-750/1000-S is a synchro-linear actuator which, due to its synchronized control, is excellently suited for opening large and unstable flaps. The actuator is housed in a special aluminum tube with integrated multi-functional groove and thus enables flexible fastening technology as well as an almost invisible laying of the connecting cable.

Overload protection through integrated overload cut-off

About the internal spindle, the torque tube is retracted and extended. The actuator operates with a force of 750 N in the thrust direction. An integrated electronic overload cut-off monitors the power consumption of the actuator. In case of overload, this switches off the actuator.

Synchronous operation through synchronous control

Equipped with a synchronous control, synchronous operation of two, three or four electro-mechanical, variable-speed linear actuators can be forced on the EA-L 750/1000-S linear actuator. A connecting core ensures overload of one of the connected actuators for a shutdown of the actuator group.

Your benefits at a glance:

  • Maximum power despite small diameter
  • Invisible laying of the connecting cable
  • Flexible fastening technology
  • Integrated overload cut-off
  • Force of 750 N
  • Flexible bracket sets

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Article nameLinear actuator EA-L-750/1000-S
Input voltage24 V DC
Nominal current1.4 A
Stroke1000 mm
Push force750 N
Pull force750 N
Running speed6.4 mm/s
IP codeIP54
Switch on duration30 %
Weight3.55 kg
Housing length1363 mm
Housing width36 mm
Housing height42 mm
Connection cableSilicone cable 5 x 0.75 mm², light gray, length 3,000 mm
Nominal working temperature20 °C
Environment temperature range-5 °C - 75 °C
Nominal locking force900 N
HousingEnd-to-end aluminium profile tube, anodized in E6/EV1, with integrated retainer for flexible bracket system
Appliance classIII
Cut-OffIntegrated electronic overload cut-off
Features3 Years warrantySynchroSHEVVENTInput 24 VDCN-SHEV approved
Housing typeAluminium
Input voltage range- 15 % / + 15 %

Resize Font
Contrast Mode
0
    0
    Your Basket
    Your basket is emptyReturn to Shop