Linear actuator EA-L-1000/500-S

£252.00 / £302.40 incl. VAT

Linear actuator EA-L-1000/500-S
24 V DC / 1.2 A / 1000 N / 500 mm stroke / Synchronous actuator

The linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.

Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.2 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 1000 N
Pulling force: 1000 N
Nominal locking force: 1200 N
Stroke length: 500 mm
Running speed: 4.2 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 5 x 0.75 mm², light grey, length 3,000 mm
Dimensions (LxWxH): 863 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 2.20 kg

- Coating according to RAL or DB

SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-1000/500-S
Article number: M2 1710 S

The linear actuator EA-L-1000/500-S is a sturdy actuator for opening large and unstable flaps. The integration of the motor in a special aluminum tube with integrated multi-function groove, a versatile and flexible mounting technology and an almost invisible installation of the connecting cable is possible.
The torque tube is retracted and extended via an internal spindle. The drive has a force of 1,000 N in the thrust direction. In the event of overload, the integrated electronic overload cut-off switches off.

Parallel connection of up to four actuators

Since the EA-L-1000/500-S linear actuator is a synchro actuator, up to four actuators can be connected in parallel. The integrated synchronous control system enforces synchronous operation of two, three or four electronic linear actuators and guarantees uniform opening of large or unstable flaps. The actuators are speed-controlled.

Your benefits at a glance:

  • Maximum power despite small diameter
  • Invisible laying of the connecting cable
  • Flexible fastening technology
  • Integrated overload cut-off
  • Force of 1,000 N
  • Flexible bracket sets

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Article nameLinear actuator EA-L-1000/500-S
Input voltage24 V DC
Nominal current1.2 A
Stroke500 mm
Push force1000 N
Pull force1000 N
Running speed4.2 mm/s
IP codeIP54
Switch on duration30 %
Weight2.2 kg
Housing length863 mm
Housing width36 mm
Housing height42 mm
Connection cableSilicone cable 5 x 0.75 mm², light gray, length 3,000 mm
Nominal working temperature20 °C
Environment temperature range-5 °C - 75 °C
Nominal locking force1200 N
HousingEnd-to-end aluminium profile tube, anodized in E6/EV1, with integrated retainer for flexible bracket system
Appliance classIII
Cut-OffIntegrated electronic overload cut-off
Features3 Years warrantySynchroSHEVVENTInput 24 VDCN-SHEV approved
Housing typeAluminium
Input voltage range- 15 % / + 15 %

Resize Font
Contrast Mode
    Your Basket
    Your basket is emptyReturn to Shop