The folding arm² turning actuator PA-KL²-DF-K-S is an extremely powerful actuator for the electromotive opening and closing of bottom-hung, top-hung and side-hung sashes. It is suitable for use on inward and outward closing elements. It is mounted on the secondary closing edges. This actuator is a synchronous version.
The actuator PA-KL²-DF-K-S can be used very flexible regarding the installation situation and direction of rotation. Depending on the type of installation, opening widths of up to 140° are possible, thus ensuring rapid smoke extraction and ventilation in case of fire. The PA-KL²-DF-K-S turning actuator is tested and certified according to EN 12101-2 for use in a natural smoke and heat exhaust ventilation system and can also be used for controlled natural ventilation.
The PA-KL²-DF-K-S turning actuator has a special kinematics and the high performance gear (> 20.000 load changes) in combination with the stainless steel lever arm is very resistant. With a push and pulling force of 400 N and the extremely small installation dimension, this automatic opener is ideal for projects with high aesthetic demands - especially for short, heavy window sashes.
More power through synchronous version
The PA-KL²-DF-K-S can also be used as a synchronous actuator on bottom-hung and top-hung sashes that offer little space for opening. As a synchronous version, the folding arm applies a force of up to 800 N and can therefore be easily used on heavy elements. Its high resistance guarantees a safe functioning of the folding arm actuator even in strong winds.
The connection is made via the SICO-PLUG connector plug. This contains the SICO BUS programming interface, which allows the direct on-site parameterization of parameters such as opening stroke and force and the readout of further status messages. The PA-KL²-DF-K-S turning actuator can be networked with each other in synchronous groups as well as for remote control with SHEV control centers and building management systems.
In both end positions OPEN/CLOSED the actuator also offers a potential-free contact. Work sequence control and start-up delay are freely adjustable. Due to the freely adjustable start-up delay, the rotary wing folding arm is ideal for the automated opening of secondary sashes. The PA-KL²-DF-K-S turning actuator can also be used in combination with an additional locking device.
Your advantages at a glance:
- suitable for bottom-hung, top-hung and side-hung sashes
- versatile use at secondary closing edges
- Automation of inward and outward opening elements possible
- large ventilation cross section
- low operating costs
- programmable via software interface
- 3 years warranty
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.
