Automatic Fire Curtain – Face fixed for openings 1,300mm wide

£3,495.00£4,355.00

Fire protection curtain FSV2-182-SFS-E120
Fire PROtec² E120-C2 according to DIN EN 16034

System size FSV2-182-SFS-E120: max. 2800 x 3000 mm (WxH)

Head-box length: ___ mm
Clear width: ___ mm

Total height: ___ mm
Unroll length / Clear height: ___ mm

Head-box made of sheet steel (WxH): 150 x 182 mm
Side guide rails made of sheet steel (WxD): 95 x 58 mm
Material head-box, side guide rails: galvanized steel (coating on request)
Fabric: Polyurethane-coated E-glass fabric, approx. 690 g/m² (A2 according to EN 13501-1)
Mode of operation1: Unrolling by gravity (Gravity fail safe)
Mode of operation2: Roll-up via drive unit as tubular motor 24 V DC with hold-open system
Motor position: left (standard)
Installation situation: Reveal and wall-mounting with appropriate, approved mounting material
Optional: Coating in RAL colors according to customer choice.

Manufacturer:
SIMON PROtec Systems GmbH
Type: Fire PROtec² fire curtain FSV2-182-SFS-E120
Article number: FSV2 2001

Clear
SKU: N/A Category: Tags: , Brand:

The fire curtain system Fire PROtec² will start a new generation of textile smoke and fire protection. It is just as flexible as the certified smoke and fire protection qualities of the harmonised standard EN 16034.

We incorporated the expertise of our product development as well as the production with regard to smoke ventilation actuators into the new FSV2 (project name). Thus, the production of serial and project parts could be significantly enhanced. Compared to its precursor, the new system complies with the requirements of EN 16034 from the very beginning. As of now, it can be labelled with a declaration of performance CE in the direct and extended area of application. At the same time, this is your proof of usability for integrating the system in your building project.

With the FSV2-182-SFS-E120 you´ll get following version:

  • Fire PROtec² E120-C2 for preventing flash overs for more than 120 Minuten. (Wall and Reveal mounting)

Developing the Fire PROtec², the main focus was to keep the headboxes small (150x182 mm with a curtain size of 2.80 x 3 m) and the visual quality high. The curtain will be delivered as a construction kit and can be mounted and installed easily which saves both time and money. Especially the "snap-in" mechanism considerably facilitates the installation of the pre-fabricated roller unit. As for the control units, SIMON PROtec offers two possibilities (with and without emergency power, + emergency open) with an approved locking panel RZ-24.

The whole system can be used for outside application if equipped with a heating system and a weather protection shield.

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

FSV2 2001

Article nameFire curtain Fire PROtec² FSV2-182-SFS-E120
Housing width150 mm
Housing height182 mm
HousingHead box (W x H): galvanized sheet steel 1.5 mm (150 x 182 mm, one-piece); Side guides (W x H): Galvanized sheet steel 2 mm (58 x 95 mm)
FabricFire retardant polyurethane coated e-glass fabric in grey 690 g/m² (A2 | EN 13501-1)
Unwinddescending by gravity (fail safe)
Rewindplanetary gear drive, 24 V DC, 3 A with electronic overload cut-off; roll shaft-integrated
System installationReveal and wall-mounting with appropriate, approved mounting material
System sizemax. 2800 x 3000 mm (WxH)
Bottom BarGalvanized steel 2 mm with integrated springs and round steel in fabric bag for gravity fail-safe
ClassificationE120 EW15 C2 with CE according to DIN EN 16034, VKF approval for Switzerland #31657

FSV2 2001

Resize Font
Contrast Mode
0
    0
    Your Basket
    Your basket is emptyReturn to Shop