Damper interface panel with hotbox, 24VDC, 0.8A Output

£438.00 / £525.60 incl. VAT

The EV-100-PC-HBV damper interface unit with hotbox is a flexible and reliable controller for all types of smoke control and fire damper. The unit is suitable for spring return fire dampers or open drive closed smoke control dampers and can be used to monitor manual fire dampers.

Available for Next Working Day Dispatch

SKU: EV-100-PC-HBV Category: Tag: Brand:

The EV-100-PC-HBV Damper interface panel with hotbox is CE Marked to low voltage and EMC directives, providing powered outputs for all types of actuators including powered open/close, spring and modulating dampers with end switches and modulating position feedback.

Its thermal enclosure provides a fire survival time of 300°C for 90 minutes, independently witnessed by Lloyd’s Register.  With monitored inputs for smoke/heat detectors or fire alarm interfaces, damper default positions are set locally for normal and alarm conditions.  The interface is used in conjunction with the EV-DCP-N to provide a complete damper control system or can accept a signal from a smoke detector or fire alarm interface unit for individual control.

 

EV-100-PC-HBV at a glance:

  • 0.8 Amp 24VDC actuator output
  • 230V AC output with an option module
  • 0-10V modulating output and feedback (3 position control dampers)
  • Damper end switch and position fault monitoring
  • Monitored fire alarm input for smoke detectors, fire alarm interface or call points
  • Automatic test sequence and reporting
  • Configuration by local DIP switches and position pot
  • Local status LED indications and test/reset button
  • Selectable standalone or network mode
  • 255 Addresses set by DIP switches
  • Fire survival time of 300°C for 90 minutes, independently witnessed by Lloyd’s Register

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Enclosure

Panel with hotbox

Brand

SIMON PROtec

Conformity

CE Marked to low voltage and EMC directives

Cable Entries

8 no. pre-drilled 6mm dia. max cables

IP Rating

IP55

Max Current Load

24V DC, 0.8A / 230V AC, 1.2A

Voltage Output

Standard – 24V DC, 0.8A, Optional – 230V AC, 1.2A

Voltage Input

230V AC + 10% / -6%

Operating Temperature

Fire survival of 300°C for 90 minutes

Finish

FabBloc insulating material, RAL 9010 White

Dimensions

H:284mm x W:284mm x D:160mm

Product Weight

5.6Kg (including panel)

Resize Font
Contrast Mode
0
    0
    Your Basket
    Your basket is emptyReturn to Shop