Damper Control Panel with HMI

£4,488.33£7,585.00

The EV-DCP-N Damper Control Panel sub-distributes essential power supplies and is networked to the zone panels, fan starter panels and HMI panel. Includes an EN 12101-10 compliant power supply for back-up of PLC & Comms.

Clear
SKU: N/A Category: Tag:

Our EV-DCP-N Damper Control Panel can network up to 120 EV-100 damper interface panels having up to 32 fire alarm inputs with a 2-wire bus protocol for reduced cabling costs.

A central control centre for intelligent control and monitoring of smoke control dampers. Additionally, the panel offers monitoring for manual fire dampers through the SCS UniDamp EV-100 damper interface unit.

The open protocol user-friendly software is configured through the mounted 12-inch user interface panel with a simple to use touch screen-driven menu system. The panel can control up to 120 damper interface units and panels can be networked for larger installations. The zoning of dampers is easily achieved and can be altered at any time to suit any modifications to cause and effect scenarios.

An optional facility for remote monitoring and scheduled testing of dampers is integrated to ensure the long-term safety of the system. The power supply to the PLC and comms network is fully compliant with BS EN 12101:10 Smoke and heat control systems.

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Brand

Easivent

BMS Interfaces

Modbus / BACnet

Cable Entries

Top

IP Rating

IP55

Voltage Input

230V AC

Operating Temperature

-5 to +50 °C ambient temperature

Finish

Mild steel, RAL 7035 light grey powder-coated finish

Resize Font
Contrast Mode
0
    0
    Your Basket
    Your basket is emptyReturn to Shop