Linear Spindle Actuator – 500N, 24V, 750mm Stroke

£190.00 / £228.00 incl. VAT

Linear actuator EA-L-500/750-S
24 V DC / 1.2 A / 500 N / 750 mm stroke / Synchronous actuator

The linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.

Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.2 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 500 N
Pulling force: 500 N
Nominal locking force: 600 N
Stroke length: 750 mm
Running speed: 7.4 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 5 x 0.75 mm², light gray, length 3,000 mm
Dimensions (LxWxH): 1113 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 2.85 kg

- Coating according to RAL or DB

SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-500/750-S
Article number: M2 1703 S

Frequently Bought Together

Linear Actuator + Firemans Override Switch + EV-301Smoke Ventilation AOV Control Pane Control Panel
Price for all three: £653.00

Hardly any other linear actuator has such stability as the EA-L-500/750-S. Housed in a special aluminum tube with integrated multi-function groove, the actuator allows flexible mounting and almost invisible laying of the connection cable.

Overload cut-off for more safety

An internal spindle moves the torque tube in and out with a force of 500 N. The integrated electronic overload cut-off monitors the current consumption of the actuator and switches it off in case of overload.

Synchronous actuator for uniform opening

The integrated synchronization control forces a synchronous operation of two, three or four electromechanical linear actuators and thus enables a uniform opening of large and unstable flaps. The actuators are speed-controlled. A connection wire shuts off the actuator group if one of the connectedactuators overloads.

Your benefits at a glance:

  • Maximum power despite small diameter
  • Invisible laying of the connecting cable
  • Flexible fastening technology
  • Integrated overload cut-off
  • Force of 500 N
  • Flexible bracket sets

Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Part numberM2 1703 S
Article nameLinear actuator EA-L-500/750-S
Input voltage24 V DC
Nominal current1.2 A
Stroke750 mm
Push force500 N
Pull force500 N
Running speed7.4 mm/s
IP codeIP54
Switch on duration30 %
Weight2.85 kg
Housing length1113 mm
Housing width36 mm
Housing height42 mm
Connection cableSilicone cable 5 x 0.75 mm², light gray, length 3,000 mm
Nominal working temperature20 °C
Environment temperature range-5 °C - 75 °C
Nominal locking force600 N
HousingEnd-to-end aluminium profile tube, anodized in E6/EV1 with integrated retainer for flexible bracket system
Appliance classIII
Cut-OffIntegrated electronic overload cut-off
Brackets includedno
Features3 Years warrantySynchroSHEVVENTInput 24 VDCN-SHEV approved
Housing typeAluminium
Input voltage range- 15 % / + 15 %

Resize Font
Contrast Mode
    Your Basket
    Your basket is emptyReturn to Shop