The EA-L-500/500-S is a sturdy linear actuator that is ideal for opening large and unstable flaps. In this actuator, the motor is located in a special aluminum tube with integrated multifunction groove. This allows a flexible and versatile mounting of the actuator as well as an almost invisible laying of the connecting cable.
Monitored current consumption and overload cut-off for safe operation
With the EA-L 500/500-S, the torque tube is retracted and extended via an internal spindle. The linear actuator operates with a force of 500 N in the thrust direction. The current consumption is monitored by the integrated electronic overload cut-off. In the event of overload, the overload cut-off switches off the actuator.
Synchro actuator with speed control
The EA-L 500/500-S is a synchro actuator that enforces synchronous operation of two, three or four electromechanical linear actuators thanks to integrated synchronization control. The actuators are speed-controlled. In case of overload of one of the connected actuators, a connection wire shuts down the actuator group (combination of up to a maximum of four actuators).
Your benefits at a glance:
- Maximum power despite small diameter
- Invisible laying of the connecting cable
- Flexible fastening technology
- Integrated overload cut-off
- Force of 500 N
- Flexible bracket sets
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.