The linear actuator EA-L-500/1000-S is a synchro actuator, which is particularly distinguished by its stability. In this actuator, the motor is housed in a special aluminum tube with integrated multifunction groove. As a result, a flexible attachment and an almost invisible installation of the connection cable is possible.
More power with more safety
The torque tube is moved in and out of this actuator via an internal spindle with a force of 500 N in the thrust direction. An integrated electronic overload cut-off monitors the power consumption of the actuator and switches it off in case of overload.
Integrated synchronization control for synchronous operation
The integrated synchronization control forces a synchronous operation of two, three or four electromechanical, variable-speed linear actuators. At the same time, it serves for the uniform opening of large or unstable flaps. If one of the interconnected actuators overloads, a connecting core will shut off the actuator group (combination of up to a maximum of four).
Your benefits at a glance:
- Maximum power despite small diameter
- Invisible laying of the connecting cable
- Flexible fastening technology
- Integrated overload cut-off
- Force of 500 N
- Flexible bracket sets
Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.